Aerial Work Platforms, Find Boom Lifts, Scissir Lifts and Fork Lifts

AWPs or Aerial Work Platforms are becoming more of a necessity for many construction projects.  What type of AWP do you need?

A cherry picker (also known as a boom lift, man lift, basket crane or hydraladder), is a type of aerial work platform that consists of a platform or bucket at the end of a hydraulic lifting system.

Articulated lifts, also known as boom lifts or hydraulic platform are almost exclusively hydraulically powered, and are the closest in appearance to a crane. They consist of a number of jointed sections, which can be controlled to extend the lift in a number of different directions, which can often include ‘up and over’ applications.

A scissor lift is a type of platform which can usually only move in the vertical plane. The mechanism to achieve this is the use of linked, folding supports in a criss-cross ‘X’ pattern. The upward motion is achieved by the application of pressure to the outside of the lowest set of supports, elongating the crossing pattern, and propelling the work platform vertically. The Platform may also have an extending ‘bridge’ to allow closer access to the work area (because of the inherent limits of vertical only movement). The bridge is also known as “extendable deck” option.

Brief industry History:  Let’s go back for a little history. In 1993, the industry had just recovered from a massive downturn in business in the early ’90s and most observers expected sales to climb about 15 percent annually for a few years. Sales had been good in 1993, with scissor lifts up about 40 percent over the low point in 1992. Then came 1994 and sales jumped almost 80 percent; ’95s sales popped 47 percent and finally ‘96 came in with another vault of 20 percent. Total sales in 1996 were estimated in excess of 33,000 scissor lifts.  In the boom machines, sales for 1996 were close to 12,500 units, which compares with about 4750 units in 1993. Sales were up more than 50 percent in ‘96 vs. ‘95.  Where is all of this demand coming from? Most is coming from the rental equipment business. Machinery dealers have built huge rental fleets of these machines, primarily because they see the rental fleet as a way to make a lot of money and the best avenue through which to sell the machines to the end customers, generally contractors in the building industry.

Aerial work platforms are also being purchased by the independent rental houses such as Hertz Equipment Rental, Prime Equipment and U.S. Rentals.  At last count, there were about 25 manufacturers selling these machines in North America, most of them stationed here full time, with a few importers from Europe. Names such as JLG, Simon, Skyjack, Snorkel, Mayville, Grove and Genie are the big players in the boom and scissor lift markets. Then come a slew of companies that share the “what’s left” category.  Without doubt, the biggest of the aerial work platform companies is JLG, which is the Caterpillar of the work platform industry. While you can’t equate the two companies in terms of size, they are similar in market penetration and leadership in the business.

JLG, based on our estimates, accounted for about 23 percent of scissor lift sales in 1996 and approximately 38 percent in boom lifts, where it dominates.  JLG’s sales have climbed from $123 million in 1993 to $413 million in 1996 and should be in the range of $500 million for the year that ended this July 31.

Skyjack, located in Guelph, Ontario, Canada, is second in the scissor lifts, ranked closely behind JLG. The company is another success story in recent years and achieved sales results for the fiscal year just ended of $197 million (Canadian) versus $129 million for the prior year, a 53 percent increase. The company’s scissor lifts account for an estimated 83 percent of total sales, while expansion into self-propelled boom lifts and truck lifts is growing rapidly and now accounts for about 17 percent of the total.  In the scissor lifts the top players after JLG and Skyjack are Upright, Mayville, Grove (Manlift) and Snorkel in that order.

Upright, based in Selma, Calif., accounts for about 14 to 15 percent of the scissor market and has been growing at a fast pace like the other major suppliers.

In the boom lifts, Genie is a distant second behind JLG, followed by Grove and Snorkel. The top four companies in the boom lifts account for over 75 percent of the industry’s sales.  One of the eye-catching events thus far in 1997 has been the acquisition of Simon Aerials by Terex Corp., which already has Mark Industries as part of its stable of businesses. Simon and Mark together will be a major force in the scissor lift business, as well as the boom business. The Simon Access purchase cost Terex $90 million.

Terex Cranes, a subsidiary of Terex Corp., will operate the access business and the Mark and Simon brand names will disappear, to be known in the future as Terex Aerials.  Thus far in 1997, sales of machines continue to move forward, perhaps at a slower rate than seen in recent years, but ahead nonetheless. We are looking for growth of about 5 percent in the domestic market this year at best, some of which may be inventory building.  Yes, there will be a downturn perhaps in the next year or two, but not like the one that devastated the business in the early ’90s. And I’ll go out on the limb and say that there will be consolidation within the industry as companies not having aerial work platforms among their product offerings will seek those that do.  <a onClick=”javascript:pageTracker._trackPageview(’/outgoing/article_exit_link’);” href=”http://www.boom-scissor-lift.com”>Great Deals on Genie, Grove, JLG, Snorkel, Lull</a>

Originally posted 2010-01-03 11:38:38.

Work Safety Fork Lift Platforms

A forklift platform attaches to a fork truck and elevates personnel and materials. There are many occasions that require workers to be elevated in this manner, and forklift platforms provide a safe, compact, and economical alternative to larger equipment such as man lifts and freight elevators. Forklift work platforms are used both indoors and outdoors for a variety of tasks, many of which can only be accessed with a smaller platform designed to fit into hard-to-reach places. Companies routinely employ them for inventory management, any number of equipment repair operations, lighting and electrical maintenance, and building repair.

Regardless of the type of forklift platform you use for your application, there are certain essential attributes you should look in any potential purchase. Your platform should be strong enough to support workers and equipment without buckling or bowing in the middle. It must also provide one or more means of enclosure to prevent workers who may inadvertently trip from falling off the platform. Forklift platforms designed with skid-proof decks and toe guards provide additional protective measures, and Easy Rack strongly recommends you invest a little extra in models that screen workers from forklift masts.

Currently we have three major lines of forklift platforms from which you can choose. These lines are designed to be highly maneuverable and access difficult places with minimal risk of injury.

Industrial Forklift Platform

These platforms will fit any standard or industrial sized forklift and can pass through an opening as narrow as 3′. The platform can be accessed by a variety of fork sizes ranging up to 6″ wide by 2 2/4″ thick. The platform is secured by a positive pin locking system that holds it in place, and workers are shielded from the forklift mast by a safety protection screen that extends vertically from the base of the platform and prevents workers from coming into contact with the mast. Full perimeter rails provide a safe enclosure in which to work. Workers access the unit through the middle rail in the front, which locks in place once the crew is aboard. This is much safer than a gate that can swing open in mid-air.

Slip-On Style Forklift Platforms

These forklift attachments are intended to reach over obstacles that normally require a boom to access. Much smaller, more economical, and faster than scaffolds, they are ideal for jobs that require safe, quick elevation of workers to places that are unsafe to climb to. These platforms are maximized for worker safety because they are built with skid proof decking that minimizes the risk of slippage. Full perimeter guard rails feature toe guards and tie offs for lanyards.

Quick-Tach Style Forklift Platforms

This platform separates worker space from material space by creating a smaller, but very sturdy, platform for materials. They are optimized for outdoor use on construction sites and rough terrain. Supported by adjustable vertical supports, this materials platform is rated as 600 pounds capacity. Workers stay inside the safe perimeter of the guardrails, which also feature toe guards and lanyard tie offs for additional safety measures. To make the unit super safe, your material handling specialist can also have it custom built with mast protection. Skid proof decking, easy and safe access to tools, and skid-free work space make this the most robust attachment for multi-application use both indoors and out.